CERN - European Organization for Nuclear Research logo.
June 23, 2017
While the Large Hadron Collider (LHC) is at the start of a new season of data taking, scientists and engineers around the world are already looking ahead, and working hard to develop its upgrade, the High-Luminosity LHC. This upgrade is planned to start operation in 2026, when it will increase the number of collisions by a factor of five to ten. Physicists will be able to take full advantage of this increased number of collisions to study the phenomena discovered at the LHC in greater detail.
This major upgrade to the machine requires installation of new equipment in 1.2 kilometres of the 27km-long-accelerator. Among the key components that will be installed are a set of new magnets: around 100 magnets of 11 new types are being developed.
Image above: View of a short-model magnet for the High Luminosity LHC quadrupole. (Image: Robert Hradil, Monika Majer/ProStudio22.ch).
More powerful superconducting quadrupole magnets will be installed at each side of the ATLAS and CMS detectors. Their purpose is to squeeze the particles closer, increasing the probability of collisions at the centre of the two experiments. These focusing magnets will exploit an innovative superconducting technology, based on the niobium-tin compound, which makes the quadrupoles’ magnetic field far greater, 50% higher than current LHC superconducting magnets based on niobium-titanium.
The magnets are now in the prototype phase – shorter models, on which tests are run to assess the stability of the design and the mechanical structure. Last year, two 1.5 metre-long short model quadrupoles were tested at CERN and at Fermilab, in the US. A third short model will soon be tested at CERN.
The LHC's future, part 1: The High-Luminosity quadrupole magnet
(Video: Noemi Caraban Gonzalez/CERN)
In January 2017, a full-length 4.5 metre-long coil – a world record-breaking length, for that kind of magnet – has been tested at the US Brookhaven National Laboratory and reached the nominal field value of 13.4 T. Meanwhile at CERN, winding the 7.15-metre-long coils for the final magnets has already begun.
The new magnets are being developed through a collaboration between CERN and the LHC-AUP (LHC Accelerator Upgrade Project) consortium, which involves three US laboratories.
This article is an excerpt from a feature article published here: http://home.cern/cern-people/updates/2017/06/crown-jewel-hl-lhc-magnets
Note:
CERN, the European Organization for Nuclear Research, is one of the world’s largest and most respected centres for scientific research. Its business is fundamental physics, finding out what the Universe is made of and how it works. At CERN, the world’s largest and most complex scientific instruments are used to study the basic constituents of matter — the fundamental particles. By studying what happens when these particles collide, physicists learn about the laws of Nature.
The instruments used at CERN are particle accelerators and detectors. Accelerators boost beams of particles to high energies before they are made to collide with each other or with stationary targets. Detectors observe and record the results of these collisions.
Founded in 1954, the CERN Laboratory sits astride the Franco–Swiss border near Geneva. It was one of Europe’s first joint ventures and now has 22 Member States.
Related links:
High-Luminosity LHC: http://home.cern/topics/high-luminosity-lhc
ATLAS: http://home.cern/about/experiments/atlas
CMS: http://home.cern/about/experiments/cms
Large Hadron Collider: http://home.cern/topics/large-hadron-collider
For more information about European Organization for Nuclear Research (CERN), Visit: http://home.cern/
Image (mentioned), Video (mentioned), Text, Credits: CERN/Corinne Pralavorio/written by Stefania Pandolfi.
Best regards, Orbiter.ch