jeudi 3 juin 2021

NASA’s Juno to Get a Close Look at Jupiter’s Moon Ganymede

 







NASA - JUNO Mission logo.


Jun 3, 2021

The first of the gas-giant orbiter’s back-to-back flybys will provide a close encounter with the massive moon after over 20 years.


Image above: Left to right: The mosaic and geologic maps of Jupiter’s moon Ganymede were assembled incorporating the best available imagery from NASA’s Voyager 1 and 2 spacecraft and NASA’s Galileo spacecraft. Image Credits: USGS Astrogeology Science Center/Wheaton/NASA/JPL-Caltech.

On Monday, June 7, at 1:35 p.m. EDT (10:35 a.m. PDT), NASA’s Juno spacecraft will come within 645 miles (1,038 kilometers) of the surface of Jupiter’s largest moon, Ganymede. The flyby will be the closest a spacecraft has come to the solar system’s largest natural satellite since NASA’s Galileo spacecraft made its penultimate close approach back on May 20, 2000. Along with striking imagery, the solar-powered spacecraft’s flyby will yield insights into the moon’s composition, ionosphere, magnetosphere, and ice shell. Juno’s measurements of the radiation environment near the moon will also benefit future missions to the Jovian system.

Ganymede is bigger than the planet Mercury and is the only moon in the solar system with its own magnetosphere –  a bubble-shaped region of charged particles surrounding the celestial body.

“Juno carries a suite of sensitive instruments capable of seeing Ganymede in ways never before possible,” said Juno Principal Investigator Scott Bolton of the Southwest Research Institute in San Antonio. “By flying so close, we will bring the exploration of Ganymede into the 21st century, both complementing future missions with our unique sensors and helping prepare for the next generation of missions to the Jovian system – NASA’s Europa Clipper and ESA’s [European Space Agency’s] JUpiter ICy moons Explorer [JUICE] mission.”

Rotating Globe of Ganymede Geology

Video above: Animation of a rotating globe of Ganymede, with a geologic map superimposed over a global color mosaic. Video Credits: USGS Astrogeology Science Center/Wheaton/ASU/NASA/JPL-Caltech.

Juno’s science instruments will begin collecting data about three hours before the spacecraft’s closest approach. Along with the Ultraviolet Spectrograph (UVS) and Jovian Infrared Auroral Mapper (JIRAM) instruments, Juno’s Microwave Radiometer’s (MWR) will peer into Ganymede’s water-ice crust, obtaining data on its composition and temperature.

“Ganymede’s ice shell has some light and dark regions, suggesting that some areas may be pure ice while other areas contain dirty ice,” said Bolton. “MWR will provide the first in-depth investigation of how the composition and structure of the ice varies with depth, leading to a better understanding of how the ice shell forms and the ongoing processes that resurface the ice over time.” The results will complement those from ESA’s forthcoming JUICE mission, which will look at the ice using radar at different wavelengths when it becomes the first spacecraft to orbit a moon other than Earth’s Moon in 2032.

Signals from Juno’s X-band and Ka-band radio wavelengths will be used to perform a radio occultation experiment to probe the moon’s tenuous ionosphere (the outer layer of an atmosphere where gases are excited by solar radiation to form ions, which have an electrical charge).

“As Juno passes behind Ganymede, radio signals will pass through Ganymede’s ionosphere, causing small changes in the frequency that should be picked up by two antennas at the Deep Space Network’s Canberra complex in Australia,” said Dustin Buccino, a signal analysis engineer for the Juno mission at JPL. “If we can measure this change, we might be able to understand the connection between Ganymede’s ionosphere, its intrinsic magnetic field, and Jupiter’s magnetosphere.”

JUNO probe orbiting Jupiter. Animation Credit: NASA

Three Cameras, Two Jobs

Normally, Juno’s Stellar Reference Unit (SRU) navigation camera is tasked with helping keep the Jupiter orbiter on course, but during the flyby it will do double duty. Along with its navigation duties, the camera – which is well shielded against radiation that could otherwise adversely affect it – will gather information on the high-energy radiation environment in the region near Ganymede by collecting a special set of images.

“The signatures from penetrating high-energy particles in Jupiter’s extreme radiation environment appear as dots, squiggles, and streaks in the images – like static on a television screen. We extract these radiation-induced noise signatures from SRU images to obtain diagnostic snapshots of the radiation levels encountered by Juno,” said Heidi Becker, Juno’s radiation monitoring lead at JPL.

Meanwhile, the Advanced Stellar Compass camera, built at the Technical University of Denmark, will count very energetic electrons that penetrate its shielding with a measurement every quarter of a second.

Also being enlisted is the JunoCam imager. Conceived to bring the excitement and beauty of Jupiter exploration to the public, the camera has provided an abundance of useful science as well during the mission’s almost five-year tenure at Jupiter. For the Ganymede flyby, JunoCam will collect images at a resolution equivalent to the best from Voyager and Galileo. The Juno science team will scour the images, comparing them to those from previous missions, looking for changes in surface features that might have occurred over four-plus decades. Any changes to crater distribution on the surface could help astronomers better understand the current population of objects that impact moons in the outer solar system.

Due to the speed of the flyby, the icy moon will – from JunoCam’s viewpoint – go from being a point of light to a viewable disk then back to a point of light in about 25 minutes. So that’s just enough time for five images.

“Things usually happen pretty quick in the world of flybys, and we have two back-to-back next week. So literally every second counts,” said Juno Mission Manager Matt Johnson of JPL. “On Monday, we are going to race past Ganymede at almost 12 miles per second (19 kilometers per second). Less than 24 hours later we’re performing our 33rd science pass of Jupiter – screaming low over the cloud tops, at about 36 miles per second (58 kilometers per second). It is going to be a wild ride.”

More About the Mission

JPL, a division of Caltech in Pasadena, California, manages the Juno mission for the principal investigator, Scott J. Bolton, of the Southwest Research Institute in San Antonio. Juno is part of NASA’s New Frontiers Program, which is managed at NASA’s Marshall Space Flight Center in Huntsville, Alabama, for the agency’s Science Mission Directorate in Washington. Lockheed Martin Space in Denver built and operates the spacecraft.

More information about Juno is available at:

https://www.nasa.gov/juno

https://www.missionjuno.swri.edu

Image (mentioned), Video (mentioned), Animation (mentioned), Text, Credits: NASA/Tony Greicius/Karen Fox/Alana Johnson/Southwest Research Institute/Deb Schmid/JPL/DC Agle.

Best regards, Orbiter.ch