ISS - Advanced Combustion via Microgravity Experiments (ACME) patch.
April 19, 2022
Fire was not just relevant to human life in antiquity but remains integral to our modern lives. It heats our homes and water, cooks our food, produces our electricity, propels our vehicles, and more. Yet, given its great complexity, there is still much we do not know about complexities of flame behavior.
To gain a deeper understanding of combustion phenomena, a team of investigators from academia, NASA’s Glenn Research Center and the agency’s Biological and Physical Sciences Division, and other organizations recently completed a series of investigations on the International Space Station. The in-orbit testing for the Advanced Combustion via Microgravity Experiments, or ACME, project began in 2017 and included six successful investigations of non-premixed flames of gaseous fuel.
Image above: JAXA astronaut Norishige Kanai reconfigures the High Bit-depth Multispectral (HiBMs) camera within the Combustion Integrated Rack (CIR) for the Electric-Field Effects on Laminar Diffusion Flames (E-FIELD Flames) experiment. Image Credit: NASA.
Non-premixed flames are those where the fuel and the oxidizer remain separate before reaction, or ignition, like a candle flame. Premixed flames occur in many of the everyday use scenarios mentioned above, where the fuel and oxidizer are mixed prior to reaction.
“A microgravity environment enables researchers to explore flame behavior without the influence of gravity, so they can investigate the underlying physics behind flame structure and behavior,” said Dennis Stocker, ACME Project Scientist at NASA Glenn. “That knowledge can help designers and engineers here on Earth develop furnaces, power plants, boilers, and other combustion systems that are more efficient, less polluting and safer.”
Image above: Combustion researchers designed experiments on the space station that analyzed the behavior of spherical flames in microgravity. Image Credit: NASA.
The six ACME experiments were:
- Burning Rate Emulator (BRE) – demonstrated materials can burn for minutes in the absence of air flow in crew vehicle atmospheres being considered for future missions.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/bre/
- Coflow Laminar Diffusion Flame (CLD Flame) – yielded benchmark data at sooty and highly-diluted extremes to improve computational models.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/cld-flame/
- Cool Flames Investigation with Gases (CFI-G) - resulted in non-premixed cool flames of gaseous fuels without enhancements, such as heated reactants, pulsed plasmas, or ozone addition, that have been required in ground testing.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/cool-flames-investigation-with-gases-cfi-g/
- Electric-Field Effects on Laminar Diffusion Flames (E-FIELD Flames) – demonstrated the potential use of electric fields to reduce emissions from non-premixed flames.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/e-field-flames/
- Flame Design – demonstrated, for the first time, quasi-steady non-premixed spherical flames, and radiative heat loss leading to extinction for larger flames.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/flame-design/
- Structure and Response of Spherical Diffusion Flames (s-Flame) – provided data on flame growth and extinction for the improvement of computational models.
https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/experiments/s-flame/
The experiments were conducted with a single modular set of hardware in the space station’s Combustion Integrated Rack (CIR). The tests were remotely commanded from NASA’s Glenn ISS Payload Operations Center in Cleveland.
“Over 1,500 flames were ignited, more than three times the number originally planned,” said Stocker. “Several ‘firsts’ were also achieved, perhaps most notably in the areas of cool and spherical flames.”
Stocker said about 50 personnel from NASA Glenn, academia, and ZIN Technologies, Inc. supported ACME during four and a half years of in-orbit operations. In addition, more than 30 crew members from six countries played an essential role in setting up the hardware for each investigation and replacing gas bottles, igniter tips, and other experiment-specific hardware as needed.
The ACME hardware has been removed from the CIR to make room for the Solid Fuel Ignition and Extinction, or SoFIE, hardware that launched in February 2022, which is the next step in NASA’s in-orbit combustion research. The ACME hardware is scheduled to return to Earth in the coming months with the intent to launch again to the space station with future experiments.
Related links:
Biological and Physical Sciences Division: https://science.nasa.gov/biological-physical
Advanced Combustion via Microgravity Experiments (ACME): https://www1.grc.nasa.gov/space/iss-research/iss-fcf/cir/acme/
Solid Fuel Ignition and Extinction (SoFIE): https://www.nasa.gov/feature/glenn/2022/fighting-fire-with-fire-new-space-station-experiments-study-flames-in-space
NASA’s Glenn ISS Payload Operations Center: https://gipoc.grc.nasa.gov/wp/
Space Station Research and Technology: https://www.nasa.gov/mission_pages/station/research/overview.html
International Space Station (ISS): https://www.nasa.gov/mission_pages/station/main/index.html
Images (mentioned), Text, Credits: NASA/Kelly Sands/Glenn Research Center/Doreen Zudell.
Greetings, Orbiter.ch
